LDMC-100 Ion Plasma Nitriding Furnace

The Nitriding Furnace equipment description:

Ion Plasma Nitriding furnace is mainly used for ion nitriding, ion nitrogen carburizing (soft nitriding) plasma chemical heat treatment process of mechanical parts, surface modification of mechanical parts, to obtain the required mechanical and physical and chemical properties.The whole set of equipment consists of ion power supply, automatic control system, vacuum furnace body, vacuum acquisition system, temperature measurement and control system and air supply system。

Glow ionic nitriding furnace includes ionic triding and lon-carbonitriding .glow ionic nitriding furnace can significantly enhances the surface hardness of steel parts,resistance to damage,fatigue and corrosion;because it has the advantages for energy saving, save gas, high efficiency, good quality, no pollution, etc. It has been applied widely in power, machine tools, petrochemical machinery, textile machinery, mold and other industries。

CHARACTERISTICS:

Increase of superficial hardness;

Improved resistance to wear and tear;

Improved resistance to stress;

Less Friction;

Moderate resistance to corrosion.

DEPTH:

From 0.10 to 0.5 mm  

APPEARANCE:

Due to gaseous nitriding, the product appears neat and in a shade of opaque light grey.

STEELS AFFECTED BY GASEOUS NITRIDING

· Nitriding steels;

· Steel used for tools;

· Carbon Steels;

· Tempering Steels;

· Cast-steels

LDMC-100 Pulse ion nitriding furnace main parameters :

Output voltage ：                                      0-1000V Continuous adjustable

Maximum output average current ：        100A

Peak pulse current ：                                200A

Pulse frequency：                                     1000Hz

Furnace working chamber size：             φ1400×1500mm

Working temperature：                            ≦650℃

The rated load:                                         1500KG

Limited vacuum：                                   ≤6.67Pa

Rising rate：                                           ≤0.13Pa／min

Pumping to 20Pa cost time：                 ≤30min

Arcing time：                                         ≤15μs

Control temperature precision：            ±1℃

Control pressure precision：                   ±1Pa

The technological process:                    Automatic control

Model	LDMC-100 Large chamber ion nitriding furnace
Working chamber	Ø1200*1500mm
Max Working temperature	650℃
Common working temp	500±50℃
Ultimate vacuum	≤6.7Pa/30Mi
Pressure rising rate	≤0.13Pa/min

Model	LDMC-100 Large chamber ion nitriding furnace
Maximum average output current	150A
Maximum peak output current	300A
Max nitride area	6㎡
Max loading weight	1200kgs
Output supply	100KW
Output status	Rectangular web
Frequency	1000HZ
The arc velocity	≤20 Microsecond
Control method	Fixed frequency width
Occupy space rate	0-85% continue adjustabl